This application displays a racing dashboard with a look inspired by the Abarth 695 Biposto data logger system. It can work on almost any car (since 2001) and the displayed information is retrieved from the OBDII connector of the car with an ELM327 bluetooth adapter.

Important NOTES:
– It’s mandatory to have an ELM327 bluetooth adapter connected to the car and paired with the Smartphone / tablet before using the app, else the app will not work. The app automatically detects ELM327 if it’s properly connected and paired.
– With some ELM 327 adapter the app can fail to connect. In this case try to change the connection mode in settings. There are 3 different modes: Fast, Medium and Slow. Default mode is Fast.

Modes:
– Two main modes: Dashboard and Telemetry.
– Long click on “KonArt” to switch between dashboard and telemetry modes.

Dashboard:
– Display RPM, speed, current gear, shift-lights, turbo pressure, fuel level (if supported by the car), oil temperature (if supported by the car), coolant temperature, throttle position, AIT (air intake temperature), AFR (air fuel ratio), MIL error codes if any, road information (speed limit, road name, bump alert).
– 4 different LCD layouts. Select desired one with a tap on “KonArt” on the center bottom of the display.
– 9 different LCD display colors. Select desired one with a long click on the display.
– OBD adapteur selection (settings).
– Connection mode selection depending on phone and ELM327 performances (settings).
– Metric units or Imperial units (settings).
– Gear indicator calibration depending on the car (settings).
– Shift-light calibration for cold engine and hot engine (settings).
– Alerts thresholds calibration (settings).
– Display max speed, rpm and turbo pressure (settings).
– Display road information: speed limit, road name, bump alert. This feature requires GPS and internet connection (settings).
– Display error codes if any and option to clear codes (settings).

Telemetry:
– 6 different data sets: Performances, km/h vs RPM, Turbo vs RPM, Throttle vs RPM, Gear vs RPM, Coolant temperature vs Oil temperature.
– Simple click on “KonArt” to change data set.
– Display max session data (Speed & RPM) or max ever data (settings).
– Display best session data (accelerations) or best ever data (settings).
– Save data in CSV file.

NOTE:
– The gear indicator is calibrated by default for the Abarth 500/595/695 5 speeds gearbox. You can re-calibrate it for any other car in the settings menu.
– The road information feature requires use of GPS and internet connection.